Soldering is one of the most common tasks used in almost all kinds of plumbing jobs. Plumbers usually carry soldering tools along with their important work tools. Soldering is not a difficult task. Anyone can do it if you have the necessary tools with you. Learn to solder your pipes and fittings which could be useful at some point of time. Some of the important tools required for soldering are pipe cutter, sand cloth, sand paper, propane cylinder and torch, lead free solder, fitting brush, small brush, solder paste, safety glasses, gloves and a fire extinguisher. Before starting to solder you have to wear the safety glasses and also keep the fire extinguisher handy. Wear your gloves too.
Soldering brass and copper pipes
The section of the pipe which has to be soldered needs to be completely dry. First, cut it to the required length. Clean the ends of the pipe using a sand cloth till they become shiny. If there is some dirt left, the solder may not work properly. With the help of a brush clean the inner side of the fittings. You can use a sand cloth also to clean it. Apply the soldering paste to the inside of the fittings and end of the pipe with the small brush. Ignite the torch and hold it about half inch far from your fitting. Place the solder to the fitting and heat. When it melts you can see it moving round the fitting. Stop the torch and use the solder to level the fitting. Use a wet cloth to wipe the excess paste. For testing your work, turn on the water and check.
Now that you know to solder pipes and fittings you may not require the assistance of professionals in case of a broken pipe or leakage. Now some jobs will require professional assistance and if you do need a pro, make sure to check out top companies like Champs Atlanta Plumbing.
Related posts: